Endangered Knowledge: The Soul of Humus — The Bison in the Texaco Star

The Bison in the Texaco Star

The third pasture/exhibition

 As in agriculture that rejuvenates the soil, the bison has rotated to its third pasture/exhibition. It began in a historic grain silo/art venue in Sculpture Month Houston's Altamira, which considered modern caveman's materials and message to the future, followed by the Blue Norther exhibit, where the bison addressed extreme weather's connection to soil. Now it brings its message to the Houston Forever exhibition in the former Texaco Building in downtown Houston.

The Star building, former home of Texaco, the company that developed the Spindletop gusher in 1901 and took the US into the oil age, is a key location in the sculpture's rotation. The bison in the Star embodies our civilization's conflict "between" ecology and commerce. Before Spindletop, oil was primarily used for lighting and as a lubricant. With Spindletop's abundance, Texaco began marketing petroleum for mass consumption. What can we learn about natural carbon cycling through the soil from the herd's eating and waste habits — also called consumption and regeneration — contrasted with the development of the energy industry and our society's mass consumption without individual responsibility for regeneration? Comparing and contrasting these two energy sources, both receive energy from the earth: one where each consumer returns carbon to the soil and the other supplying a chain of energy but still trying to figure out how to repay its debt of carbon for future generations. Integrating natural systems of regeneration can steer our innovation and creative minds to a future in which consumption, conservation and regeneration of earth's resources are in balance.

 

Symbiosis- scientific research that support the living sculpture.

“All is not doom and gloom, though, according to Dr Rodger. Many plants are long-lived, opening a window of opportunity to restore pollinators before plant extinctions occur from lack of pollinators.”- First global estimate of importance of pollinators for seed production in plants

Symbiosis4.5 cubic yards of compost ( living organic material), 200 plus Texas Native plants installed to support the return of Houston’s urban wildlife.  Summer 2021 Image by Nash Baker

Symbiosis

4.5 cubic yards of compost ( living organic material), 200 plus Texas Native plants installed to support the return of Houston’s urban wildlife.
Summer 2021

Image by Nash Baker

Carbon by the Yard - a weekly update

Carbon by the Yard

Zoysia Turfgrass relief

35' X 48'

Embedded within the installation Symbiosis, Carbon by the Yard is a temporary, living sculpture in the shape of the Carbon element symbol, C. The work consists of carving a 16 x 14-foot shape into the existing grass, and allowing the Zoysia grass to grow tall around it. A simple gesture, the letter brings attention to the role lawn-grass plays in climate change. In 2020, the Environmental Protection Agency estimated that grass uses up about a third of all public water: in the US, this translates to 9 billion gallons of water every day. Our mowers consume 200 million gallons of gas.  The U.S. Environmental Protection Agency estimates that, gas-powered lawn mowers produce 11 times as much pollution as a new car hour for hour. And, manicured lawns provide no livable habitats for pollinators or the other plants and animals necessary to maintain a healthy ecosystem. With Carbon by the Yard, artist-environmentalist Cindee Klement brings attention to the ways in which our daily decisions can help to reduce our carbon footprints. 

Reducing nitrate leaching losses from turfgrass fertilization of residential lawns

The sketch for Lawndale approval

The sketch for Lawndale approval

September 23, 2021 I sketched the C into the space with flags. Moving and adjusting them until I had the shape C right and in the right  place.

September 23, 2021

I sketched the C into the space with flags. Moving and adjusting them until I had the shape C right and in the right place.

Next  I marked the C with a water base paint used to mark fields.

Next I marked the C with a water base paint used to mark fields.

The C marked in water based paint.

The C marked in water based paint.

October24th- The first cutting. The yard maintenance company used their regular mower. The CO2, cost, time, and  noise pollution of the gass lawn mower was not worth the result.

October24th- The first cutting.

The yard maintenance company used their regular mower. The CO2, cost, time, and noise pollution of the gass lawn mower was not worth the result.

I was afraid that the following week the lawn maintenance company would not be able to see the relief enough  to remow it. I remarked the C with the flags. The second cutting was rained out.

I was afraid that the following week the lawn maintenance company would not be able to see the relief enough to remow it. I remarked the C with the flags.

The second cutting was rained out.

I will update this blog post through out the process.

October 8th - week three cutting #2

October 8th - week three cutting #2

October 18th - Week 4 cutting #3

October 18th - Week 4 cutting #3

October 22 - week 5  cutting #4

October 22 - week 5 cutting #4

After 4 cuttings the C is now beginning srand out.

November 1- week  6 cutting #5

November 1- week 6 cutting #5

November  7- week  #7cutting #6

November 7- week #7cutting #6

November 12th, week #8 cutting #7

November 19th, week #9 cutting #8

November 26th, week #10 cutting #9

December 3rd, week #11 cutting #10

December 24th, week #14 cutting #13

January 9, week #16 cutting #15

March 30 - this would have been week 29……. Unfortunately, it is not.

I noticed the grass was growing exceptionally slow. Long story short Lawndale’s lawn maintenance company was mowing on a high setting.

I am starting over on counting weeks of emissions saved.

April 10th, week 1, not cutting the yard #1

Spring 2022

August 2022

Endangered Knowledge: The Soul of Humus

Today‘s progress may not look like much, however I worked 7 hours. I was focused on filling the tiny spaces in the groin, inside its flanks and rear end. And I was careful not to catch my skin on the sharp edges of the late. It is razor-sharp and requires careful deliberate moves.

Endangered Knowledge: The Soul of Humus

I attach the lath with airplane safety wire. Think of lath as the skin. Once the armature is covered in lath/skin, I will add the fur/soil/dried native plants.

Endangered Knowledge: The Soul of Humus

Today's work

Yes, I use a sewing tape measure

Yes, I use a sewing tape measure

I worked on his middle

I worked on his middle

Endangered Knowledge: The Soul of Humus

A few weeks ago Nash Baker took some in progress shots of my SMH piece. Then I had two weeks of off and on heat exhaustion. It is a rough summer to have an outdoor living sculpture and a piece that requires welding in a space that does not gave AC. I have finally replenished the minerals in my body and I am back to work on my bison. The temperatures are going to be extremely high this week to work outside. :(

Working on Endangered Knowledge: The Soul of Humus in my garage welding studioPhoto by Nash Baker

Working on Endangered Knowledge: The Soul of Humus in my garage welding studio

Photo by Nash Baker

Symbiosis art activism update - landscape ordinance.

One of my goals as an artist is to inspire city Landscape policy change. Our cities landscape policy evolved before we had the telescopes to understand the living systems below ground. It is Necessary to update these policies that regulate or urban landscapes and utilize the power of out native landscape.

I have made great headways with discussions with city council person Sally Alcorn. She has supported my work and thoughtfully listens to what I am saying. I can see in her face and her actions that applying these regeneration agriculture principles to urban landscapes makes sense to her. She has worked in the city government for many years and understands how the machine works. She does not have landscape policy roots in her background which actually is a good thing, she does not have to unlearn. In the last few weeks, I have facilitated connecting her with two people in the native landscape world.

First Linda Knowles has led the native plant movement in Houston and Texas. She served on the cities committee for designated wildscapes and she has let the Houstin native plant society and is leading the Texas NPS. Linda is a great source of knowledge and will be a great resource for Sallie.

A few weeks ago I emailed Jaime González. Jaime is  Houston Healthy Cities Program Director of The Nature Conservancy Texas Chapter – Houston Office. Jaime is everywhere when it comes to Houston native landscape. Within 5 minutes of emailing him about “Symbiosis” he called me. He wanted to see the work. We met the following day at 8:30 am. It was not too hot yet and we had a great conversation. He was amazed at what a hot bet of wildlife can be revived in the middle of a lifeless concrete urban desert - the museum district. :(. He Specifically, positively commented that I did not leave spaces of dirt separating each plant. I could hear frustration in his voice. It is a social custom to separate species. My goal is to keep the soil covered with a minimum of 1 layer of greenery if not many layers. Hearing him approve was a relief. He also made some plant suggestions for the southwest corner. It was a beautiful corner until the lemon bee balm faded for the season.

Tuesday this week I was able to connect him with Sallie and Hannah Cobb Public Affairs Liaison Office of Council Member Sallie Alcorn City of Houston, At-Large 5. It was a great conversation and I know Jaime will assist Sallie's office with their plans.

Like Jaime, Sallie is a mover- I just received an email from her office that she is meeting with Kelli Ondracek on September 1st to discuss a native landscaping pilot program. A giant leap - this feels good.

can art active change? :) I am trying.

What can changing city landscape policy do? Right now this is how most vacant lots look in houston. This is the vacant lot adjacent to Lawndale. The owner regularly grooms/mows it per city policy.

What can changing city landscape policy do? Right now this is how most vacant lots look in houston. This is the vacant lot adjacent to Lawndale. The owner regularly grooms/mows it per city policy.

This vacant lot near university of St. Thomas is actively sequestering carbon and soaking up water cooling the planet. This is responsible urban land management.  In addition it minimizes the need for mowing. I think it would be even better with a surrounding ground cover that did not requiring mowing.

This vacant lot is actively sequestering carbon and soaking up water cooling the planet. This is responsible urban land management.

In addition it minimizes the need for mowing. I think it would be even better with a surrounding ground cover that did not requiring mowing.

Endangered Knowledge: The Soul of Humus

Progress from the last two days of work.

I worked on building the muscles on his neck, left leg bulk, sagged his bellie and made him a man.
Sagged bellie and  manhood

Sagged bellie and manhood

Endangered Knowledge: The Soul of Humus

Ferlocks, hocks and nape

Right front leg chap and starting to build the neck muscles. The neck muscles are massive.

Right front leg chap and starting to build the neck muscles. The neck muscles are massive.

I build the legs on separate days. Left keg the hock curves up and right keg the Hock curves down. I still need fetlocks. I think bison have two per foot. More research

I build the legs on separate days. Left keg the hock curves up and right keg the Hock curves down. I still need fetlocks. I think bison have two per foot. More research

IMG_9164.jpeg

Endangered Knowledge: The Soul of Humus

Todays work- His right back haunch and leg.

Endangered Knowledge: The Soul of Humus

20’ more of rebar.

I used 20’ more of rebar today to build the hip bones up on both sides and his right side in the stomach area of his side. I worked from the hip to his shoulder.

I used 20’ more of rebar today to build the hip bones up on both sides and his right side in the stomach area of his side. I worked from the hip to his shoulder.

My work space is not large enough to get a good side photo.

My work space is not large enough to get a good side photo.

Endangered Knowledge: The Soul of Humus

Stomach, upper hip bones, and more hump.

He still looks like a hybrid giraffe bison, that is only because his muscles and fur come later.

Endangered Knowledge: The Soul of Humus

Another big day of welding..I added a big 96” circumference chest. Put the entire piece on four dollies and started his hump. Below are a few pics from todays work.

Behind my garage is a telephone pole. I use it to bend my rebar.  This is a side view where I am going to bend the piece for the chest.

Behind my garage is a telephone pole. I use it to bend my rebar. This is a side view where I am going to bend the piece for the chest.

Halfway to becoming a bison chest.

Halfway to becoming a bison chest.

Then I use my weight to even out the shape.

Then I use my weight to even out the shape.

I hang the chest over the back and decide if it is big enough.

I hang the chest over the back and decide if it is big enough.

Next I weld  the ends together .

Next I weld the ends together .

Recycling some old dollies from past work and deciding on the best plan. Balance and portability is the goal. The brown paper is the footprint of my bisons. Each leg is supported by a dollie.

Recycling some old dollies from past work and deciding on the best plan. Balance and portability is the goal. The brown paper is the footprint of my bisons. Each leg is supported by a dollie.

Thanks to Curtis for getting me the plywood and helping me mount the beast. This is just for while I work on the sculpture and for transportation. It is not part of the work.

Thanks to Curtis for getting me the plywood and helping me mount the beast. This is just for while I work on the sculpture and for transportation. It is not part of the work.

Just goofing around

Just goofing around

My garage studio assistant is taking a sun break.

My garage studio assistant is taking a sun break.

Starting to assemble the hump.

Starting to assemble the hump.

And that's a wrap.

And that's a wrap.

Endangered Knowledge: The Soul of Humus

July 5th.

Attaching the head—
I welded just one connection from the neck to the head. As I assemble other parts of his body I will continue to evaluate the position of the head. I want him to be his reaching to the side searching for the next blades of grass within the reach of his massive head and tongue. With only one weld I can easily cut it off if I decide it is not in the right place or at the right angle. I do enjoy having a bobblehead bison in my garage for a while.

Building the girt—

I happened to have a circular scrap piece of rebar almost the right size. I created it years ago to be a round seat for a faux bois chair that was started and not finished. I turned it into the basis for the bison’s rear hip girth/stomach.

It is a little small, the small size gives me the flexibility to add to it exactly where I want it to protrude. As I get more elements worked out I will make it larger by adding the back hip bones that protrude. t is a lot easier to add pieces as I build him than to cut out pieces.


1 small tack world neck to head. Just to see where I want it.

1 small tack world neck to head. Just to see where I want it.

Endangered knowledge: the Soul of Humus.

SMH fall of 2020 was canceled due to Covid 19 last July of 2020. I put a halt on welding my piece and focused on planning “Symbiosis.” “Symbiosis” is installed the Big Show is opened which provided a tremendous amount of traffic. I will still check on it every day, but I will spend most of my day building my piece for SMH 2021. Today I started where I left off. Below are images from last year's work and blog posts.

When I stopped in 2020 I had the hooves on steel plate bases and new where I wanted them to bare the weight.

When I stopped in 2020 I had the hooves on steel plate bases and new where I wanted them to bare the weight.

Today I cut the rebar to form the lover part of the legs and grinded the tips. Tomorrow I weld.

Today I cut the rebar to form the lover part of the legs and grinded the tips. Tomorrow I weld.

Some of my notes from measuring Epics Bob the bison January of 2020.

Some of my notes from measuring Epics Bob the bison January of 2020.

My bison will be in motion not standing still.

The skull and upper jaw.

The skull and upper jaw.

And lower jaw

And lower jaw

4  pieces of rebar cut for each leg will provide the structure of the lower legs.

4 pieces of rebar cut for each leg will provide the structure of the lower legs.

Endangered knowledge:The Soul of Humus

I dried some cosmos leaves to us as the coat of a sculpture that is in the works - Endangered knowledge: the Soul of Humus. The piece will be in the #sculpturemonthhouston 2021 exhibit. I started the armature during COVID for the SMH 2020 exhibit, which was postponed. The sculpture looks at the ecological history of the coastal prairie. This texture is perfect #cindeeklementart #endangeredknowledge #coastalprairie #tezasart #houstonart #bioart #environmentalart #cosmos #art #sculpture #bison

IMG_4772.jpeg