IU - The labyrinth design - How will it be installed?

Once the grid is installed, the next step is to think about how to divide the work so that groups of student and volunteers can install my vision. .

Two options seem viable. The first idea is by marking the (X, Y) coordinates for each circuit of planting on individual pages. The other idea is by verticle rows.

Below I have marked the coordinates of the circuits. As I mark the coordinates I am not sure this is the way. I may need to break it down to smaller sections.

I can continue to consider how to breakdown the jobs as I begin building the grid.

IU - How do you draw a labyrinth?

During the first week of my residency at IU when I wasn’t exploring the city, University, art, museums, ecology, architecture, and landscapes I was experimenting with labyrinth designs.

Some sketches of three different types of kabyrintgs.

This design starts with a simple cross. I need to keep this simple.

Turning the cross/square labyrinth upside down I decided to attempted a seed labyrinth. I think a design less feminine will be better.

Endangered Knowledge: The Soul of Humus — The Bison in the Texaco Star

The Bison in the Texaco Star

The third pasture/exhibition

 As in agriculture that rejuvenates the soil, the bison has rotated to its third pasture/exhibition. It began in a historic grain silo/art venue in Sculpture Month Houston's Altamira, which considered modern caveman's materials and message to the future, followed by the Blue Norther exhibit, where the bison addressed extreme weather's connection to soil. Now it brings its message to the Houston Forever exhibition in the former Texaco Building in downtown Houston.

The Star building, former home of Texaco, the company that developed the Spindletop gusher in 1901 and took the US into the oil age, is a key location in the sculpture's rotation. The bison in the Star embodies our civilization's conflict "between" ecology and commerce. Before Spindletop, oil was primarily used for lighting and as a lubricant. With Spindletop's abundance, Texaco began marketing petroleum for mass consumption. What can we learn about natural carbon cycling through the soil from the herd's eating and waste habits — also called consumption and regeneration — contrasted with the development of the energy industry and our society's mass consumption without individual responsibility for regeneration? Comparing and contrasting these two energy sources, both receive energy from the earth: one where each consumer returns carbon to the soil and the other supplying a chain of energy but still trying to figure out how to repay its debt of carbon for future generations. Integrating natural systems of regeneration can steer our innovation and creative minds to a future in which consumption, conservation and regeneration of earth's resources are in balance.

 

Endangered Knowledge: The Soul of Humus

Today's work

Yes, I use a sewing tape measure

Yes, I use a sewing tape measure

I worked on his middle

I worked on his middle

Endangered Knowledge: The Soul of Humus

A few weeks ago Nash Baker took some in progress shots of my SMH piece. Then I had two weeks of off and on heat exhaustion. It is a rough summer to have an outdoor living sculpture and a piece that requires welding in a space that does not gave AC. I have finally replenished the minerals in my body and I am back to work on my bison. The temperatures are going to be extremely high this week to work outside. :(

Working on Endangered Knowledge: The Soul of Humus in my garage welding studioPhoto by Nash Baker

Working on Endangered Knowledge: The Soul of Humus in my garage welding studio

Photo by Nash Baker

Endangered Knowledge: The Soul of Humus

Progress from the last two days of work.

I worked on building the muscles on his neck, left leg bulk, sagged his bellie and made him a man.
Sagged bellie and  manhood

Sagged bellie and manhood

Endangered Knowledge: The Soul of Humus

Ferlocks, hocks and nape

Right front leg chap and starting to build the neck muscles. The neck muscles are massive.

Right front leg chap and starting to build the neck muscles. The neck muscles are massive.

I build the legs on separate days. Left keg the hock curves up and right keg the Hock curves down. I still need fetlocks. I think bison have two per foot. More research

I build the legs on separate days. Left keg the hock curves up and right keg the Hock curves down. I still need fetlocks. I think bison have two per foot. More research

IMG_9164.jpeg

Endangered Knowledge: The Soul of Humus

Front legs and right shoulder

Front legs and right shoulder

Endangered Knowledge: The Soul of Humus

20’ more of rebar.

I used 20’ more of rebar today to build the hip bones up on both sides and his right side in the stomach area of his side. I worked from the hip to his shoulder.

I used 20’ more of rebar today to build the hip bones up on both sides and his right side in the stomach area of his side. I worked from the hip to his shoulder.

My work space is not large enough to get a good side photo.

My work space is not large enough to get a good side photo.

Endangered Knowledge: The Soul of Humus

Stomach, upper hip bones, and more hump.

He still looks like a hybrid giraffe bison, that is only because his muscles and fur come later.

Endangered Knowledge: The Soul of Humus

Another big day of welding..I added a big 96” circumference chest. Put the entire piece on four dollies and started his hump. Below are a few pics from todays work.

Behind my garage is a telephone pole. I use it to bend my rebar.  This is a side view where I am going to bend the piece for the chest.

Behind my garage is a telephone pole. I use it to bend my rebar. This is a side view where I am going to bend the piece for the chest.

Halfway to becoming a bison chest.

Halfway to becoming a bison chest.

Then I use my weight to even out the shape.

Then I use my weight to even out the shape.

I hang the chest over the back and decide if it is big enough.

I hang the chest over the back and decide if it is big enough.

Next I weld  the ends together .

Next I weld the ends together .

Recycling some old dollies from past work and deciding on the best plan. Balance and portability is the goal. The brown paper is the footprint of my bisons. Each leg is supported by a dollie.

Recycling some old dollies from past work and deciding on the best plan. Balance and portability is the goal. The brown paper is the footprint of my bisons. Each leg is supported by a dollie.

Thanks to Curtis for getting me the plywood and helping me mount the beast. This is just for while I work on the sculpture and for transportation. It is not part of the work.

Thanks to Curtis for getting me the plywood and helping me mount the beast. This is just for while I work on the sculpture and for transportation. It is not part of the work.

Just goofing around

Just goofing around

My garage studio assistant is taking a sun break.

My garage studio assistant is taking a sun break.

Starting to assemble the hump.

Starting to assemble the hump.

And that's a wrap.

And that's a wrap.

Endangered Knowledge: The Soul of Humus

July 5th.

Attaching the head—
I welded just one connection from the neck to the head. As I assemble other parts of his body I will continue to evaluate the position of the head. I want him to be his reaching to the side searching for the next blades of grass within the reach of his massive head and tongue. With only one weld I can easily cut it off if I decide it is not in the right place or at the right angle. I do enjoy having a bobblehead bison in my garage for a while.

Building the girt—

I happened to have a circular scrap piece of rebar almost the right size. I created it years ago to be a round seat for a faux bois chair that was started and not finished. I turned it into the basis for the bison’s rear hip girth/stomach.

It is a little small, the small size gives me the flexibility to add to it exactly where I want it to protrude. As I get more elements worked out I will make it larger by adding the back hip bones that protrude. t is a lot easier to add pieces as I build him than to cut out pieces.


1 small tack world neck to head. Just to see where I want it.

1 small tack world neck to head. Just to see where I want it.

Endangered knowledge: the Soul of Humus.

SMH fall of 2020 was canceled due to Covid 19 last July of 2020. I put a halt on welding my piece and focused on planning “Symbiosis.” “Symbiosis” is installed the Big Show is opened which provided a tremendous amount of traffic. I will still check on it every day, but I will spend most of my day building my piece for SMH 2021. Today I started where I left off. Below are images from last year's work and blog posts.

When I stopped in 2020 I had the hooves on steel plate bases and new where I wanted them to bare the weight.

When I stopped in 2020 I had the hooves on steel plate bases and new where I wanted them to bare the weight.

Today I cut the rebar to form the lover part of the legs and grinded the tips. Tomorrow I weld.

Today I cut the rebar to form the lover part of the legs and grinded the tips. Tomorrow I weld.

Some of my notes from measuring Epics Bob the bison January of 2020.

Some of my notes from measuring Epics Bob the bison January of 2020.

My bison will be in motion not standing still.

The skull and upper jaw.

The skull and upper jaw.

And lower jaw

And lower jaw

4  pieces of rebar cut for each leg will provide the structure of the lower legs.

4 pieces of rebar cut for each leg will provide the structure of the lower legs.

Endangered Knowledge: The Soul of Humus #15

Another day of building the bone structure of the face. The armature is more detailed than the sculpture will be. As I work I remind myself that the armature just needs to support the masses of dried mud and dried grass. It will not be visible under the herbaceous skin. I can’t seem to stop myself. I think it make me feel closer, more connect to the bison.

It also keeps me away from the news- COVID 19.

Today I worked on the lower part of it's cheekbones and then I added a rear jawbone.

Today I worked on the lower part of it's cheekbones and then I added a rear jawbone.

Looking up the mouth and nose of head minus the lower jaw.

Looking up the mouth and nose of head minus the lower jaw.

The old guys face left side

The old guys face left side

Looking through the skull

Looking through the skull

The right profile.

The right profile.

On the Road to Roam

January 19, 2020

We are on the road to Roam, and I am feeling a little concerned. I believe that we as a society are not connected to the raising/producing, culling, and processing of our food. With this disconnect, what is essential has been lost. This not only impacts our health but also our environment (including the bees) that we are borrowing from future generations. It is easy to be judgmental and to point fingers. If I am going to judge our current food production system, I need to experience the process that I believe is a healthy and responsible alternative. I need to be willing not only to talk the talk but walk the walk. Thursday, Curtis, and worked Roam’s Bison Roundup. We were nicknamed the gatekeepers. One female, after careful and thoughtful analysis, was selected to be culled today. This is not going to be easy, but I will be a better human from the experience......... on the road to Roam.

Opening the car door the last thing I hear on the radio is, ”everything is dust in the wind, ” for one second I find comfort in these words.

IMG_3977.jpeg
The ranch Anatolian livestock guard dogs greet us at the ranch entrance.

The ranch Anatolian livestock guard dogs greet us at the ranch entrance.

The herd including the cow to be culled having a relaxing morning grazing on Texas prairie grasses. The cow in question will not be separated from the herd, she will not be stressed and will not feel any pain. This is how you humanely harvest an ani…

The herd including the cow to be culled having a relaxing morning grazing on Texas prairie grasses. The cow in question will not be separated from the herd, she will not be stressed and will not feel any pain. This is how you humanely harvest an animal. This is not how industrial Agriculture harvests meat.

That explained it is a heavy feeling knowing that a life is being sacrificed. Being aware of what is being lost in order to put a high quality protein on the table makes every ounce of meat more valuable. Nothing should be wasted. The experience changes how we value animal protein.

I participated for two reasons; personal growth through awareness and a deeper knowledge for a body of work whose concept I am working on called Giving the Bird.

Endangered Knowledge: Soul of Humus #17

I started the lower jaw today. I spent the majority of the day researching the structure of the lower jaw and its movement as the bison chew.

Here is a collection of my reference material.

Here is a collection of my reference material.

Bison grab a tuft of grass with their tongue, then they pinch it off by pressing it between their tongue and their front lower teeth. They do not have top front teeth. They then swallow it whole. That is the beginning of a 24-hour digestive process.

Bison grab a tuft of grass with their tongue, then they pinch it off by pressing it between their tongue and their front lower teeth. They do not have top front teeth. They then swallow it whole. That is the beginning of a 24-hour digestive process.

I love this image, I took it last January at Roam Ranch right before the roundup. I think this is the one they call Poppy. Poppy is very curious and friendly. She is checking me out as she catches rain drops on her tongue.

I love this image, I took it last January at Roam Ranch right before the roundup. I think this is the one they call Poppy. Poppy is very curious and friendly. She is checking me out as she catches rain drops on her tongue.

You can see the lower jaw through the upper jaw here. It is slightly off to the right of the bison. I want him chewing away and want to exaggerate the movement. I will probably bend it a little more askew this weekend.

You can see the lower jaw through the upper jaw here. It is slightly off to the right of the bison. I want him chewing away and want to exaggerate the movement. I will probably bend it a little more askew this weekend.

Here the chewing lower jaw is more obvious.

Here the chewing lower jaw is more obvious.

Adjustments.jpeg
View from the rear or top down.

View from the rear or top down.

Adjustments.jpeg

Friday, I am committing to writing the Lawndale proposal- rewriting and rewriting and rewriting.

Endangered Knowledge: The Soul of Humus #14

I am getting close to finishing the head and upper jaw. The next step will be to create the lower jaw, then I will put the head aside and start building up the piece from the hooves.

More work on the cheekbones and connecting the horns to the eyes.

More work on the cheekbones and connecting the horns to the eyes.

Side view of armature

Side view of armature

Bottom side view

Bottom side view

Bison's left side view

Bison's left side view

Back of head looking down

Back of head looking down